Hi,
this article only helps for the people who are in Sri Lanka and having ADSL
Home Packagers. This explains step by step how to configure D link ADSL router.
To
configure the router, first you should have to log in to your ADSL router. To
do that properly you should follow following steps.
Step 1
Connect
the PC to the router using Ethernet cable.
Open
the web browser and enter the address http:// 192.168.1.1
Then
default user name is “admin” and password is “admin”.
Then
you will appear a web page that included router configurations.
When
you connect your PC to the ADSL router using network cable (With RJ45
connectors), will see POWER, STATUS and LAN indicators are properly working.
And also you can use any browser according to your flavor.
Step 2
In
D-link menu you have to go for “Advanced setup”.
Then
you have to enter values for PORT ,VPI and VCI.
PORT
- 0
VPI
- 8
VCI
- 35
Then
select “Service Category” as “UBR without PCR”.
“Connection
type” as “PPP over Ethernet (PPPoE)”.
Then
need to select “Encapsulation Mode” as “LLC/ SNAP-BRIDGING”
And
enter the “user name” and “password”.
Above
user name and password is supplied by your ISP (Internet Service Provider).
Step 3
After
entering those instruction need save those configuration and reboot the router.
Step 4
Can
see DSL and Internet indicators are blinking on the router.
How obtain configuration data
Call
1243 number using SLT telephone and follow instruction to connect with customer
care and ask them.
Then
following information will provide.
Required data from ISP (Sri lanka Telecom)
VPI
- 8
VCI
- 35
Connection
type as “PPP over Ethernet (PPPoE)”
Encapsulation
Mode as “LLC/ SNAP-BRIDGING”
